octavia 3 Retrofit ACC 210km/h

Hi guys, 

i have changed the rear sensors last weekend and i put the one ending on A. 

But i get the following fault codes:

                Address 03: ABS Brakes Labels: 5Q0-907-379-ESP-V1.clb
Control Module Part Number: 5Q0 907 379 R HW: 5Q0 907 379 F
  Component and / or Version: EMB8 EHCB H31 0356
           Software Coding: 1C07629124210975007D060141C4243846249000608224F0F0615070C002
            Work Shop Code : WSC 73430 031 00063
              ASAM Dataset: EV_Brake1UDSContiMK100ESP 033001 (SK37)
                       ROD: EV_Brake1UDSContiMK100ESP_033.rod
                      VCID: 4BCD144833143CC95E-801E
2 Faults Found:

0070 - Rear Left Wheel Speed Sensor 
          C101C 29 [009] - Signal Implausible
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 76
                    Mileage: 206443 km
                    Date: 2018.01.04
                    Time 20:00:27

0086 - Rear Wheel Rear Speed Sensor 
          C101D 29 [009] - Signal Implausible
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 76
                    Mileage: 206443 km
                    Date: 2018.01.04

I have encoded byte26 as it was supposed to be 01010000 BUT i have not done the rest of coding for ACC.

What do i need to check? Can you please help me out?

W jakim celu zmieniacie pompę ? to hamulcowa ?

Pompa ABS, zmieniam po to żeby obsługiwała ACC poniżej 30 km/h.

Wtyczka przyszła, jeszcze tylko na piny czekam i można działać.

6 godzin temu, George napisał:

Hi guys, 

i have changed the rear sensors last weekend and i put the one ending on A. 

But i get the following fault codes:

                Address 03: ABS Brakes Labels: 5Q0-907-379-ESP-V1.clb
Control Module Part Number: 5Q0 907 379 R HW: 5Q0 907 379 F
  Component and / or Version: EMB8 EHCB H31 0356
           Software Coding: 1C07629124210975007D060141C4243846249000608224F0F0615070C002
            Work Shop Code : WSC 73430 031 00063
              ASAM Dataset: EV_Brake1UDSContiMK100ESP 033001 (SK37)
                       ROD: EV_Brake1UDSContiMK100ESP_033.rod
                      VCID: 4BCD144833143CC95E-801E
2 Faults Found:

0070 - Rear Left Wheel Speed Sensor 
          C101C 29 [009] - Signal Implausible
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 76
                    Mileage: 206443 km
                    Date: 2018.01.04
                    Time 20:00:27

0086 - Rear Wheel Rear Speed Sensor 
          C101D 29 [009] - Signal Implausible
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 76
                    Mileage: 206443 km
                    Date: 2018.01.04

I have encoded byte26 as it was supposed to be 01010000 BUT i have not done the rest of coding for ACC.

What do i need to check? Can you please help me out?

what type of sensor ABS you buyed
try change coding to 11110000 

abs icon in instrument is lighting

7 godzin temu, rrobert napisał:

what type of sensor is the ABS you buyed
try change coding to 11110000 

abs icon in instrument is lighting

Thanks a lot!!! it worked! I coded the ABS to 11110000 and after 7-8 km. of driving it is okay. I will drive more tomorrow and check if there are errors written in the abs module.

I bought sensors  wht003864a from carsequipment. 

When i was having the fault the ABS lamp on the instrument panel was NOT on.

Will the ACC run if i do all the steps without the one with ODIS ?

Send autoscan od car 

przed chwilą, rrobert napisał:

Send autoscan from car 

autoscan.txt

i have tried to do the encoding, 

But when i reach the ABS module i receive the following error:

I have realized that i have been trying to do the coding with Byte 26 encoded to 11110000 , can this be the problem?3

If i do the rest of the encoding i get the following error in the engine:

Address 01: Engine (J623-CKFC)       Labels:. 04L-907-309-V1.clb
   Part No SW: 04L 906 021 DT    HW: 04L 907 309 D
   Component: R4 2,0L EDC   H22 8127  
   Revision: 83H22---    
   Coding: 111D001A043401091000
   Shop #: WSC 02001 451 00000
   ASAM Dataset: EV_ECM20TDI01104L906021DT 002008
   ROD: EV_ECM20TDI01104L906021DT_002.rod
   VCID: 7A3EB2053FC3E65006-802E

2 Faults Found:
17149 - Check Coding of ECUs on Powertrain Data Bus 
          P1647 00 [032] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Mileage: XXX km
                    Date: 2018.01.06
                    Time: 16:13:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 50 °C
                    Intake air temperature: 52 °C
                    Ambient air pressure: 930 mbar
                    Voltage terminal 30: 12.020 V
                    Unlearning counter according OBD: 40
                    ACC variants-Bit 0: 0
                    CCS Switch-Bit 0: 1
                    Cruise control switch actuation-Bit 0: 0
                    Cruise control switch actuation-Bit 8: 32
                    ACC variants (coding)-Bit 0: 3
                    Acceleration: 0.000 m/sІ

4709 - No Communications with Cruise Control (Front) Distance Sensor 
          U0235 00 [032] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Mileage: XXX km
                    Date: 2018.01.06
                    Time: 16:12:59

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 50 °C
                    Intake air temperature: 52 °C
                    Ambient air pressure: 930 mbar
                    Voltage terminal 30: 12.020 V
                    Unlearning counter according OBD: 40
                    Drivetrain coordinator: ACC fault status-Bit 0: 0
                    Drivetrain coordinator: ACC fault status-Bit 8: 0
                    Drivetrain coordinator: brake fault status-Bit 0: 0
                    Drivetrain coordinator: brake function status-Bit 0: 0
                    Drivetrain coordinator: brake function status-Bit 8: 0
                    Acceleration: 0.000 m/sІ

Readiness: 0 0 0 0 0 

No to mam komplet.

Dnia 12.09.2016 at 21:05, rrobert napisał:

co należy:

- radar z odblokowaną funkcją - 300 euro

Hello.
Is it possible to buy an unlocked radar?

Dnia 10.01.2018 at 17:01, Michael napisał:

buy an unlocked radar?

no, you must change soft, @rrobert has

Informacja dla właścicieli z DSG, po wypięciu wtyczki od pompy ABS oprócz choinki komunikatów na desce autem będzie się dało jechać tylko na jedynce ze znikomą reakcją na gaz.

20 minut temu, Namo napisał:

no, you must change soft, @rrobert has

dziękuję

Czyli jest patent na ręczny w prądzie pod Stop&Go z ACC.

Tak w superbie 

Dnia 19.01.2018 at 21:33, Namo napisał:

Czyli jest patent na ręczny w prądzie pod Stop&Go z ACC.

Tell me, what do I need for electric handbrake? Brake сalipers from Golf7? Button from the Golf7? Wires to the ABS unit or BCM? It's all?

Stop&follow działa bo pompa ABS wymieniona. Tempomat ACC można aktywować przy każdej prędkości, auto zatrzymuje się na kilka sekund za samochodem które stoi na światłach po czym prosi kierowcę o wciśnięcie pedału hamulca.

Dnia 21.01.2018 at 22:36, Michael napisał:

Brake сalipers from Golf7?

Maybe something like that.

Trzeba by się więc rozglądać za elektrycznymi zaciskami z Golfa VII bo VII R już mają wentylowane tarcze 310 mm.

Thank you.
I showed your photos to friends. they asked to make them electric handbrake too, like in your car)))
Handbrake lever cover made by hand from fiberglass?

14 minut temu, Michael napisał:

electric handbrake too, like in your car

It's not my car, it's a brakes from Golf 7 R for the R-Performance Octavia 3 RS+ project.

16 minut temu, Michael napisał:

Handbrake lever cover made by hand from fiberglass?

It's an individually made one piece. I am trying to have one.

1 godzinę temu, Namo napisał:

Trzeba by się więc rozglądać za elektrycznymi zaciskami z Golfa VII bo VII R już mają wentylowane tarcze 310 mm.

Can you tell number of calipers for standard 272 mm brakes?

10 minut temu, Michael napisał:

272 mm brakes?

left 5Q0615405CK

right 5Q0615406CK

but I'm not sure, i have to check with @rrobert

6 minut temu, Namo napisał:

left 5Q0615405CK

right 5Q0615406CK

but I'm not sure, i have to check with @rrobert

Thank you.
VW golf7 parts catalog gives other numbers. they are not on allegro.pl

5 minut temu, Michael napisał:

other numbers

this from allegro is parts for

VW GOLF 7 , TOURAN 2015-

SKODA OCTAVIA III

SEAT LEON III

AUDI A3 8V0

Z Golfa 7 GTI miałbym czerwone.

Numer guzika to 5G0927225D, najlepiej brać z tunelem co by było w czym rzeźbić.

9 minut temu, Namo napisał:

Numer guzika to 5G0927225D, najlepiej brać z tunelem co by było w czym rzeźbić.

OK. Thank you.
From this part must carefully cut out the button.

Need look for electrical circuits of golf7. I hope my ABS unit supports the electric handbrake.